Thanks for registering to this advanced course on "Library characterization and modelling". Really happy to see you all taking that extra mile to learn some real industry level work that happens in a chip tape-out.

But I must tell you that, to get fully benefited from this course, you need to have knowledge on Circuit design and SPICE simulations, Physical design, Custom layout and Static timing analysis, either from my existing courses or from any other sources of learning... But 100% knowledge on these topics is needed. No exceptions

I have created limited $10 coupon code for these courses only for people registered in "Library Characterization" course and that's YOU.

If you have already taken that course, please complete those courses 100%

If you haven't registered for those courses, you can use below discount coupon link (or learn from other sources and references)....

Physical design flow:

https://www.udemy.com/vlsi-academy-physical-design-flow/?couponCode=LIB_COURSE_REQUISITE

Circuit design and SPICE simulations - Part 1:

https://www.udemy.com/vlsi-academy-circuit-design/?couponCode=LIB_COURSE_REQUISITE

Circuit design and SPICE simulations - Part 2:

https://www.udemy.com/vlsi-academy-circuit-design-part2/?couponCode=LIB_COURSE_REQUISITE

Custom layout:

https://www.udemy.com/vlsi-academy-custom-layout/?couponCode=LIB_COURSE_REQUISITE

Static timing analysis - Part 1:

https://www.udemy.com/vlsi-academy-sta-checks/?couponCode=LIB_COURSE_REQUISITE

Static timing analysis - Part 2: